Welcome, Guest
Username Password: Remember me
2 Topics
  • Page:
  • 1

Latest messages

emo
Brian most builders of wood hulls prefer to use a 2 part epoxy preferably 30 min or slower so it soaks into the wood make a very strong joint and dries to become waterproof as well. Definitely don't use a CA type product to build any structured hull components because the wood joint will fail.I have heard of some using the Titebond product but you can't go wrong with a good quality epoxy.

Jesse
LSG OUTRIGGER HYDRO ...
emo
Want to Build A LSG rigger Hull from aircraft grade Birch ply its been about 30 years since I have built a outrigger.
Could anyone give me some pointers on which type of glue to use.
I was considering Titebond 3 waterproof or gorilla wood (non Foaming)waterproof wood glue vs. the CA. type of glues.
I think the wood glue would be stronger and more resistant to shock than the CA Type, also the hull will be epoxy sealed adding a little extra protection to the glue joint areas.
Any suggestions on what to use, and few pros and cons from one type glue to the other.
Thanks Brian
LSG OUTRIGGER HYDRO ...
2 Topics
  • Page:
  • 1

Who is online

In total there are 82 users Online  ::  0 Members and 82 Guests 
Legend ::   Site Administrator Global Moderator Moderator User Guest
  • Total Messages: 8407 | Total Subjects: 1511
  • Total Sections: 1 | Total Categories: 1
  • Today Open: 0 | Yesterday Open: 0
  • Today Total Answer: 0 | Yesterday Total Answer: 0
Time to create page: 0.06 seconds